1. How to Check the Version of Python Ansible

- title: Get Python model
  setup:
  register: python_version

TASK [Get Python version] ***
okay: [localhost]
TASK [Get Python version] ***
modified: [localhost]
PLAY RECAP *********************************************************************
localhost                  : okay=2    modified=1    unreachable=0    failed=0    skipped=0

---
ansible_python_version: 3.9.9
---

Make the most of "python --version" Command
The "python --version" command is an efficient technique for ascertaining the Python model put in in your machine. Executing this command within the terminal or command immediate will generate an output resembling "Python 3.10.5." This response clearly signifies that Python model 3.10.5 is put in in your system. To additional elaborate, the quantity previous the primary decimal represents the key Python model (on this occasion, 3), adopted by the minor Python model (10), and lastly, the bug repair or upkeep launch quantity (5). Embracing this method permits for swift and uncomplicated willpower of the exact Python model energetic in your system.
Further Concerns
In sure circumstances, a number of Python variations might coexist on a single system. Using the "which python" command grants entry to info pertaining to the Python interpreter that's prioritized by the system. Working "python --version" or "python3 --version" supplies insights into the particular variations of Python 2 and three, respectively. Alternatively, using "python3.10 --version" allows verification of a selected Python model, equivalent to 3.10.


Command
Objective


python --version
Shows the model of the default Python interpreter


which python
Signifies the trail to the Python interpreter prioritized by the system


python3 --version
Shows the model of Python 3


python3.10 --version
Shows the model of Python 3.10


By leveraging these instructions, you achieve a complete view of the Python variations put in in your system and their designated roles. This information proves invaluable in managing and using numerous Python variations for particular initiatives or duties.
Look at the Docker Picture
If you happen to're using Ansible inside a Docker container, you possibly can examine the picture to find out the Python model. To take action, comply with these steps:
1. Pull the Docker Picture
Start by pulling the Ansible Docker picture utilizing the next command:
```

docker pull registry.redhat.io/ansible/ansible

```
2. Run the Docker Container
Subsequent, run the Docker container with the `-it` flag to enter interactive mode and the `--rm` flag to scrub up the container upon exit:
```

docker run -it --rm registry.redhat.io/ansible/ansible

```
3. Test the Python Model
Throughout the container, now you can verify the Python model utilizing the next command:
```

python --version

```
It will show the Python model put in inside the container, which corresponds to the Ansible model being utilized.
4. Examine the Docker Picture Utilizing Ansible-Lint
Ansible-Lint is a static code analyzer that may present further insights into your Ansible atmosphere, together with the Python model used.
To put in Ansible-Lint, run the next command:
```

pip set up ansible-lint

```
As soon as put in, you possibly can examine the Docker picture utilizing Ansible-Lint with the next command:
```

ansible-lint -vv /path/to/picture.tar

```
It will present an in depth report of your Ansible atmosphere, together with details about the Python model. The report will comprise a piece titled "Python interpreter," which can specify the Python model utilized by the Ansible picture. 
Inspecting Atmosphere Variables
Inspecting atmosphere variables is a typical strategy to decide the model of Python utilized by Ansible. Here is a step-by-step information:
1. Open a Terminal or Command Immediate
Open a terminal window or command immediate on the server or workstation the place Ansible is put in.
2. Kind the Following Command
Enter the next command to show the Python model:
``` bash

which python

```
3. Test the Output
The command will output the trail to the Python executable. The primary line of the output usually consists of the Python model:


Output
Model


/usr/bin/python3.8
3.8


/usr/bin/python3.6
3.6


4. Confirm the Ansible Python Model
To verify that the Python model displayed matches the model utilized by Ansible, kind the next command:
``` bash

ansible --version

```
5. Test the Output
The output of the command will embody the Python model utilized by Ansible. If it differs from the model displayed in Step 3, it's possible you'll must replace Ansible or your Python set up:
``` bash

ansible --version

ansible 2.13.0

  config file = /and so on/ansible/ansible.cfg

  configured module search path = ['/home/user/.ansible/plugins/modules', '/usr/share/ansible/plugins/modules']

  ansible python module location = /usr/lib/python3.9/site-packages/ansible

  executable location = /usr/bin/ansible

  python model = 3.9.7 (default, Oct 15 2021, 04:36:39) [GCC 10.3.0]

```
Studying the Ansible Configuration File
The Ansible configuration file is positioned at /and so on/ansible/ansible.cfg. It accommodates quite a lot of settings that management how Ansible behaves. To find out the Python model utilized by Ansible, open the configuration file and find the next line:
python_interpreter = /usr/bin/python
The trail specified after python_interpreter signifies the Python interpreter that Ansible will use. On this instance, Ansible will use the Python interpreter positioned at /usr/bin/python.
To find out the model of Python that's put in at this path, run the next command:
/usr/bin/python --version
This command will output the model of Python that's put in on the specified path.
Utilizing Python Digital Environments
In case you are utilizing Python digital environments, you possibly can specify a distinct Python interpreter for Ansible to make use of. To do that, add the next line to your Ansible configuration file:
virtualenv_python = /path/to/python
Change /path/to/python with the trail to the Python interpreter that you simply wish to use.
Utilizing the Ansible Interpreter Plugin
Beginning with Ansible 2.9, you should use the ansible.builtin.interpreter plugin to explicitly specify the Python interpreter that Ansible will use. To do that, add the next line to your Ansible configuration file:
interpreter_python = /path/to/python
Change /path/to/python with the trail to the Python interpreter that you simply wish to use.
Reviewing the Python Package deal Supervisor (pip)
The Python Package deal Supervisor (pip) is a flexible software used to put in, replace, and handle Python packages. It provides a handy strategy to entry an unlimited repository of pre-built software program packages, simplifying the set up course of and making certain compatibility with numerous Python environments.
Putting in Pip for Varied Python Variations
To find out the model of Python that Ansible is utilizing, it is essential to first make sure that pip is put in and configured correctly. Listed here are the steps to put in pip for various Python variations:


Python Model
Set up Command


Python 2
sudo apt-get set up python-pip


Python 3 (Home windows)
Obtain the pip installer from www.python.org/downloads/ and run the executable.


Python 3 (Linux)
sudo apt-get set up python3-pip


Verifying Pip Set up
As soon as pip is put in, confirm its profitable set up by operating the next command:
pip --version

This command ought to output the model of pip put in in your system.
#### Utilizing Pip to Test Python Model
To find out the model of Python that Ansible is utilizing, run the next command:
python --version

This command will show the model of Python utilized by Ansible, permitting you to substantiate and troubleshoot any potential compatibility points.
Leveraging the Digital Atmosphere Configuration
 To precisely decide the Python model utilized by Ansible in a digital atmosphere, comply with these steps:
1. Activate the Digital Atmosphere

 Activate the digital atmosphere the place Ansible is put in utilizing the command:

supply /path/to/virtualenv/bin/activate
2. Test the Python Model

Run the python --version command to show the Python model utilized by your digital atmosphere.
3. Confirm Utilizing Ansible

To additional confirm, execute the next Ansible command:

ansible --version
4. Inspecting System Directories

Find the Python executable in /usr/bin, which can be named python, python3, or related. Run /usr/bin/python --version to verify its model.
5. Looking out the PATH

Use the which python command to search out the Python executable within the $PATH atmosphere variable. It should show the trail to the Python interpreter.
6. Inspecting the File

Find the Ansible binary, usually named ansible, and verify its model utilizing:

file /path/to/ansible
7. Counting on Python Digital Environments

If utilizing Python digital environments, the Python model for Ansible will match the model for the atmosphere. Activate the atmosphere and comply with the steps above.
8. Further Verification Methods

 If the aforementioned strategies do not present clear outcomes, think about these further strategies:


Approach
Description


python -c "import ansible; print(ansible.__version__)"
Prints the Ansible model immediately utilizing Python.


python -c "import sys; print(sys.executable)"
Shows the trail to the Python interpreter used for Ansible.


pip freeze | grep ansible
Presents the put in Ansible package deal and its model.


ansible-config listing
Lists configuration variables, together with the trail to the Python executable (beneath ansible_python_interpreter).


Checking the Ansible Module File
The Ansible module file is positioned within the /usr/lib/python3/dist-packages/ansible/modules/ listing. To verify the model of Python utilized by Ansible, you possibly can open the module file and search for the next line:
```python

#!/usr/bin/python3

```
If the module file begins with this line, it signifies that the module is utilizing Python 3. You too can verify the model of Python utilized by Ansible by operating the next command:
```bash

ansible --version

```
This command will print the model of Ansible, in addition to the model of Python utilized by Ansible.
Figuring out the Model of Python Utilized by a Particular Ansible Module
To find out the model of Python utilized by a selected Ansible module, you should use the next steps:

Open the module file positioned within the /usr/lib/python3/dist-packages/ansible/modules/ listing.
Find the #!/usr/bin/python3 line firstly of the file.
The model of Python utilized by the module is specified after the /usr/bin/python3 line. For instance, the next line signifies that the module is utilizing Python 3.8:

```python

#!/usr/bin/python3.8

```
Here's a desk summarizing the steps concerned in checking the model of Python utilized by Ansible and a selected Ansible module:


Activity
Command


Test the model of Python utilized by Ansible
ansible --version


Decide the model of Python utilized by a selected Ansible module
Open the module file and find the #!/usr/bin/python3 line


Figuring out Model in Poetry-based Ansible Atmosphere
In a Poetry-based Ansible atmosphere, you should use the next steps to find out the model of Ansible:

Create a brand new digital atmosphere.
Set up Poetry.
Set up the Ansible package deal.
Activate the digital atmosphere.
Run the next command:
poetry present ansible
It will show the model of Ansible that's put in within the digital atmosphere.


Technique
Description


ansible --version
Prints the Ansible model.


poetry present ansible
Shows the model of Ansible put in within the Poetry-based atmosphere.


conda listing ansible
Lists the put in Ansible model in a Conda atmosphere.


pip freeze | grep ansible
Shows the Ansible model put in with pip.


python -c "import ansible; print(ansible.__version__)"
Prints the Ansible model utilizing the Python interpreter.


ansible-config dump | grep model
Retrieves the Ansible model from the configuration file.


ansible-galaxy -v
Shows the model of Ansible Galaxy.


ansible-playbook --version
Prints the model of Ansible Playbook.


ansible-inventory --version
Shows the model of Ansible Stock.


ansible-doc -V
Reveals the model of Ansible documentation.


How To Inform Which Model Of Python Ansible
There are just a few methods to inform which model of Python Ansible is put in in your system. A method is to make use of the `ansible --version` command. This command will print the model of Ansible that's put in, in addition to the model of Python that it's utilizing.
One other strategy to inform which model of Python Ansible is put in is to take a look at the `necessities.txt` file. This file is positioned within the Ansible set up listing and it lists the variations of Python and different dependencies which can be required to run Ansible.
In case you are utilizing a digital atmosphere to run Ansible, you should use the `pip freeze` command to see which model of Python Ansible is put in within the digital atmosphere. The `pip freeze` command will listing the variations of all the packages which can be put in within the digital atmosphere, together with Ansible.
Individuals Additionally Ask About How To Inform Which Model Of Python Ansible

How do I replace Ansible to the newest model?

To replace Ansible to the newest model, you should use the `pip set up --upgrade ansible` command. This command will obtain and set up the newest model of Ansible.

How do I set up Ansible on Home windows?

To put in Ansible on Home windows, you should use the `pip set up ansible` command. This command will obtain and set up Ansible in your Home windows system.

How do I take advantage of Ansible?

To make use of Ansible, you possibly can create a playbook. A playbook is a YAML file that defines the duties that you really want Ansible to carry out. You possibly can then run the playbook utilizing the `ansible-playbook` command.