Figuring out the Filter Location
Step one in changing the Frigidaire water filter FPPWFU01 is to find the filter. The filter will be discovered on the higher right-hand facet of the fridge door. It’s housed inside a small plastic housing that’s sometimes white or grey in shade.
To take away the filter, you’ll need to know the housing and pull it straight out. The housing will slide out simply, and the filter might be seen inside. Make sure that to carry onto the housing whenever you pull it out, because the filter can fall out simply.
After getting eliminated the filter, you’ll need to take away the previous filter from the housing. To do that, merely press down on the discharge button on the facet of the housing and pull the previous filter out. You must now have the ability to see the brand new filter. To put in the brand new filter, merely insert it into the housing and push it into place. The filter ought to slide into place simply. As soon as the filter is in place, you’ll need to interchange the housing by sliding it again into place. The housing ought to click on into place when it’s appropriately put in. Your fridge’s water filter is now changed, and you may take pleasure in clear, recent water once more.
| Instruments You may Want |
|---|
| Phillips screwdriver |
| New water filter |
Gathering Crucial Instruments
Earlier than starting the filter substitute course of, collect the next important instruments:
- Substitute water filter (mannequin FPPWFU01)
- Phillips head screwdriver
- Clear fabric or paper towels
Moreover, it is strongly recommended to arrange a shallow bowl or cup to catch any residual water in the course of the filter elimination course of.
Supplies Required for Frigidaire Water Filter Substitute
| Merchandise | Amount |
|---|---|
| Frigidaire Water Filter FPPWFU01 | 1 |
| Phillips Head Screwdriver | 1 |
| Clear Material or Paper Towels | As wanted |
| Shallow Bowl or Cup (non-compulsory) | 1 |
Disconnecting the Water Line
After getting situated the water line, it’s time to disconnect it. Observe these steps rigorously:
- Flip off the water provide to the fridge by turning the water shut-off valve clockwise.
- Disconnect the water line from the fridge by disconnecting the quick-connect becoming. Use a pair of pliers to squeeze the 2 plastic tabs on the becoming and pull it right away from the fridge.
- If the water line is hooked up to the fridge with a screw, use a screwdriver to take away the screw after which pull the road right away from the fridge.
- Place the top of the water line right into a bowl or cup to catch any dripping water.
Eradicating the Previous Filter
To take away the previous Frigidaire water filter FPPWFU01, comply with these steps:
1. Find the filter
The filter is normally situated within the fridge’s top-right nook, behind the highest shelf.
2. Flip off the water provide
Find the water provide valve behind the fridge. Flip the knob clockwise to shut the valve and cease the move of water.
3. Open the filter housing
Push the button on the highest of the filter housing to launch the door. The door will swing down, revealing the filter.
4. Take away the previous filter
Grasp the previous filter and switch it counterclockwise to unlock it. Pull the filter straight right down to take away it from the housing.
| Further ideas for eradicating the previous filter |
|---|
|
Making ready the New Filter
Earlier than you substitute your previous Frigidaire water filter FPPWFU01 with a brand new one, it is necessary to arrange the brand new filter by following these steps:
- Unpack the brand new filter. Take away the brand new filter from its packaging and examine it for any injury.
- Lubricate the O-rings. Apply a small quantity of food-grade lubricant to the O-rings on the brand new filter’s cap. This may assist create a watertight seal and stop leaks.
- Take away the protecting cap. Take away the protecting cap from the top of the brand new filter.
Activating the New Filter
As soon as the brand new filter is put in, it is necessary to activate it to make sure that it really works correctly. To activate the filter, comply with these steps:
- Run water via the filter. Run water via the filter for 5-10 minutes to flush out any air pockets and sediment which may be current.
- Reset the filter indicator. In case your fridge has a filter indicator, reset it to point {that a} new filter has been put in.
- Take pleasure in filtered water. As soon as the filter is activated, you possibly can take pleasure in recent, filtered water out of your Frigidaire fridge.
Step Motion Goal 1 Unpack the brand new filter. Take away the brand new filter from its packaging and examine it for any injury. 2 Lubricate the O-rings. Apply a small quantity of food-grade lubricant to the O-rings on the brand new filter’s cap. This may assist create a watertight seal and stop leaks. 3 Take away the protecting cap. Take away the protecting cap from the top of the brand new filter. 4 Set up the brand new filter. Insert the brand new filter into the filter housing and switch it clockwise till it’s comfortable. 5 Run water via the filter. Run water via the filter for 5-10 minutes to flush out any air pockets and sediment which may be current. (300 phrases) 6 Reset the filter indicator. In case your fridge has a filter indicator, reset it to point {that a} new filter has been put in. 7 Take pleasure in filtered water. As soon as the filter is activated, you possibly can take pleasure in recent, filtered water out of your Frigidaire fridge. Putting in the New Filter
After getting eliminated the previous filter, it is time to set up the brand new one. Observe these steps rigorously to make sure a correct and safe set up:
- Unpack the brand new filter from its packaging.
- Apply a small quantity of edible oil or petroleum jelly to the O-rings on each ends of the filter. This may assist to lubricate the O-rings and create a greater seal.
- Rigorously align the brand new filter with the filter housing. Be certain that the O-rings are seated correctly within the housing.
- Manually tighten the filter by turning it clockwise till it’s comfortable. Don’t overtighten, as this could injury the filter or housing.
- In case your fridge has a filter bypass valve, shut it.
- Begin the fridge’s water dispenser and let it run for about 5 minutes to clear any air from the system and activate the brand new filter. If water doesn’t dispense, test for any leaks or be sure that the filter bypass valve is closed.
Further Ideas for Putting in the New Filter:
- At all times seek advice from your fridge’s consumer guide for particular set up directions.
- When changing the filter, it is a good suggestion to test the water traces for any leaks or injury.
- Should you expertise any difficulties putting in the brand new filter, contact a certified equipment technician for help.
Reconnecting the Water Line
7. **Reconnecting the Water Line**
Rigorously align the water line with the inlet valve on the fridge. The connection needs to be comfortable however not too tight. Check with the desk beneath for the really useful torque specs:
Connection Measurement Torque (inch-pounds) 1/4″ Compression 30-40 3/8″ Compression 25-35 1/2″ Compression or NPT 10-15 As soon as the connection is safe, use a wrench to softly tighten the nut. Don’t overtighten, as this could injury the water line or fridge inlet valve.
Activate the water provide to the fridge and test for leaks. If any leaks happen, tighten the nut additional or contact a certified plumber for help.
Flushing the System
The ultimate step is to flush the system to take away any remaining air or impurities. This may be sure that your water filter is working correctly and delivering clear, recent water.
Step 8: Operating the Water
After putting in the brand new filter, activate the chilly water faucet and run the water for five minutes at a excessive move fee. This may flush out any remaining air or impurities from the system. Chances are you’ll discover some discoloration or black particles within the water throughout this course of, which is regular and can dissipate inside a couple of minutes.
Proceed working the water till it runs clear. This means that the system has been efficiently flushed and the brand new filter is prepared to be used.
Sort of Water Flush Time Chilly 5 minutes Scorching 1 minute Resetting the Filter Monitor
Press the Filter Reset Button for five Seconds
Find the filter reset button on the entrance of the fridge, normally close to the water dispenser. Press and maintain the button for 5 seconds.
Anticipate the Filter Indicator to Flash
When you launch the button, the filter indicator gentle will begin flashing. This means that the filter monitor has been reset.
Change the Water Filter
Change the previous water filter with a brand new one and insert it into the designated compartment. Make sure that the filter is correctly aligned and absolutely inserted.
Press the Filter Reset Button Once more
Press and maintain the filter reset button for 3 seconds to substantiate the substitute. The filter indicator gentle will flip stable, indicating that the monitor has been up to date.
Further Particulars for Resetting the Filter Monitor
Listed below are some extra particulars to contemplate when resetting the filter monitor:
Step Description Maintain Time Make sure you maintain the filter reset button for the precise period of time specified. Holding it for much less or extra time might not reset the monitor correctly. Button Location The filter reset button’s location might differ barely relying on the particular Frigidaire fridge mannequin. Check with the consumer guide for the precise location. Indicator Mild Response If the filter indicator gentle doesn’t flash after urgent the reset button, repeat the method to make sure the reset was profitable. Troubleshooting Widespread Points
1. No Water Circulation After Changing the Filter
Be certain that the filter is firmly seated within the housing and that the O-rings are intact. Examine for kinks or clogs within the water line, and ensure the water provide valve is absolutely open.
2. Water Leaking from the Filter
Tighten the filter housing securely. Examine the O-rings for injury or particles and substitute them if vital. If the leak persists, contact a certified plumber.
3. Unusual Style or Odor from the Water
Flush the water line for a number of minutes to take away any particles or contaminants. If the style or odor persists, the filter could also be faulty. Change it with a brand new one.
4. Water Strain Fluctuating
Examine the filter housing for clogs or blockages brought on by sediment or particles. Clear or substitute the filter as wanted. Additionally, examine the water line for any kinks or bends which may be limiting move.
5. Filter Indicator Mild Not Resetting
Press and maintain the filter reset button for 5-10 seconds to manually reset the indicator. If the sunshine stays on, the filter will not be correctly put in or might should be changed.
6. Filter Housing Tough to Take away
Apply a lubricant, equivalent to cooking oil, to the O-rings to ease elimination. Use a filter wrench or a pair of pliers to softly loosen the housing.
7. Filter Not Correctly Becoming
Examine the brand new filter to the previous one to make sure they’re the identical dimension and form. Examine that the filter is appropriately aligned and seated within the housing.
8. Filter Bypassing
If water is flowing with out passing via the filter, be sure that the bypass valve is closed. Examine the filter housing for any injury that will permit water to bypass the filter.
9. Filter Life Not Exceeded
Monitor the lifetime of the filter and substitute it when the indicator gentle illuminates or after the really useful variety of months, sometimes 6-12.
10. Water Not Allotted from Fridge
Examine if the dispenser pad is pressed correctly. Be certain that the water line shouldn’t be frozen or kinked. If the problem persists, contact a certified equipment restore technician.
The right way to Change Frigidaire Water Filter FPPWFU01
Changing the water filter in your Frigidaire fridge is an easy process that may be accomplished in only a few minutes. By following these directions, you possibly can be sure that your fridge is offering you with clear, recent water.
Step 1: Find the Water Filter
The water filter on a Frigidaire fridge is often situated within the decrease proper nook of the fridge compartment. It’s normally lined by a plastic housing that may be eliminated by lifting it up and pulling it in direction of you.
Step 2: Take away the Previous Filter
As soon as the housing is eliminated, you will note the previous water filter. To take away it, merely twist it counterclockwise and pull it straight out.
Step 3: Insert the New Filter
Take the brand new water filter and line it up with the housing. Insert the brand new filter all the way in which into the housing, then twist it clockwise to tighten it.
Step 4: Change the Housing
As soon as the brand new filter is put in, substitute the housing by pushing it again into place till it clicks.
Step 5: Reset the Filter Indicator
After changing the water filter, it is advisable reset the filter indicator. To do that, press and maintain the “Filter Reset” button on the management panel for five seconds.
Folks Additionally Ask
How typically ought to I substitute my Frigidaire water filter?
Frigidaire recommends changing the water filter each 6 months or after 300 gallons of water has been used.
What occurs if I do not substitute my Frigidaire water filter?
Should you do not substitute your Frigidaire water filter, the filter will turn into clogged and can now not be efficient at eradicating impurities from the water. This will result in a lower in water high quality and will probably injury your fridge.
The place can I purchase a substitute Frigidaire water filter?
Substitute Frigidaire water filters will be bought at most house enchancment shops, equipment shops, and on-line retailers.
