Are you uninterested in that cumbersome rearview mirror mount cluttering up your dashboard? Is it wobbling round, obscuring your view, and driving you to the brink of distraction? Effectively, fear no extra! Eradicating the rearview mirror mount is a straightforward and simple course of that may be accomplished in only a few minutes with the best instruments and strategies. Whether or not you are trying to change to a distinct mount, promote your automotive, or just need a cleaner aesthetic, this information will give you the step-by-step directions you could deal with this process with ease. So seize your instruments and let’s get began!
To start, collect the mandatory instruments, together with a flathead screwdriver or pry device, a Phillips head screwdriver, and a clear fabric. Find the bottom of the rearview mirror mount the place it connects to the windshield. Fastidiously insert the flathead screwdriver or pry device into the hole between the mount and the windshield. Gently pry the mount away from the windshield, being cautious to not injury the glass. As soon as the mount is free, use the Phillips head screwdriver to take away the screws which are holding it in place.
With the screws eliminated, the rearview mirror mount ought to come off simply. Merely raise it up and away from the windshield. Use the clear fabric to wipe away any remaining adhesive or residue from the windshield and the mount. Should you’re not planning on reusing the mount, you may discard it. Nevertheless, if you wish to preserve it for future use, ensure to retailer it in a secure place the place it will not get broken.
Detaching the Mirror Head
### Gently Pry the Mirror Head Free
To detach the mirror head, start by rigorously inserting a plastic or wood pry device or a flat-head screwdriver wrapped in a fabric between the mirror head and the bottom of the windshield. Keep away from utilizing metallic instruments, as they’ll scratch or injury the glass.
### Work Slowly and Steadily
Apply mild stress to the pry device whereas concurrently pulling the mirror head in the direction of you. Work slowly and step by step, avoiding sudden or extreme drive that might break the mirror or injury the windshield. Proceed prying and pulling till the mirror head pops free from the bottom.
### Help the Mirror Head
Because the mirror head loosens, be sure you assist it along with your different hand to stop it from falling and damaging the automobile or your self. Grip the mirror head firmly and punctiliously detach it from the bottom. Take care to not scratch or injury the mirror floor or the windshield throughout this course of.
Be aware: Should you encounter important resistance or really feel any reluctance in detaching the mirror head, don’t drive it. Cease and seek the advice of knowledgeable for help to keep away from damaging the automobile.
Tip: Warming the adhesive across the mirror base with a warmth gun or hair dryer will help loosen it and make elimination simpler.
Accessing the Mirror Mount
Step one is to take away the plastic cowl on the bottom of your rear view mirror. It’s often held in place by two or three small screws. As soon as the quilt is off, you will note the primary mirror mount, which is linked to the windshield by a collection of bolts or screws.
| Sort of Mount | Removing Methodology |
|---|---|
| Bolt-on Mount | Unscrew the bolts holding the mount to the windshield. |
| Screw-on Mount | Unscrew the screws holding the mount to the windshield. |
| Adhesive Mount | Fastidiously use a pry device to take away the mount from the windshield. |
Relying on the kind of mount you might have, you will have both a screwdriver or a wrench.
After you have loosened the bolts or screws, you may gently pry the mirror mount away from the windshield. Watch out to not injury the windshield or the mirror mount.
Eradicating the Retaining Nuts
The retaining nuts are what maintain the rear-view mirror mount in place. To take away them, you will have a 10mm socket wrench or a pair of needle-nose pliers.
After you have the instruments you want, comply with these steps:
- Find the retaining nuts on the underside of the rear-view mirror mount. There shall be two nuts, one on both sides.
- Use the socket wrench or needle-nose pliers to loosen the nuts. Don’t take away them utterly but.
- As soon as the nuts are free, you may rigorously raise the rear-view mirror mount off of the windshield. Watch out to not drop the mount, because it may break.
Here’s a desk summarizing the steps:
| Step | Motion | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Find the retaining nuts on the underside of the rear-view mirror mount. | ||||||||||||||||||||||||||||||||||||||||||||
| 2 | Use a 10mm socket wrench or needle-nose pliers to loosen the nuts. | ||||||||||||||||||||||||||||||||||||||||||||
| 3 | As soon as the nuts are free, rigorously raise the rear-view mirror mount off of the windshield. |
| Tip | Description |
|---|---|
| Use a small flathead screwdriver to softly pry the connectors aside. | Watch out to not injury the wires or connectors. |
| If the connectors are tough to pry aside, you need to use a pair of needle-nose pliers to softly squeeze the connectors collectively whereas pulling them aside. | Once more, watch out to not injury the wires or connectors. |
| As soon as the connectors are disconnected, you may take away the mirror mount from the automobile. | To do that, merely pull the mount straight out of the windshield. |
Avoiding Mirror Harm
When eradicating the mirror mount, you will need to take precautions to keep away from damaging the mirror itself. Listed below are some suggestions to assist stop injury:
- Use a comfortable fabric or towel to guard the mirror. Place the fabric or towel over the mirror earlier than beginning to take away the mount.
- Watch out to not apply an excessive amount of stress to the mirror. Use a delicate contact when eradicating the mount.
- Don’t use any sharp objects to pry the mount off. This might injury the mirror.
- If the mount is caught, use a hair dryer to warmth it up. This may make it simpler to take away.
- As soon as the mount is eliminated, examine the mirror for any injury. If there’s any injury, it’s possible you’ll want to interchange the mirror.
- To forestall future injury, clear the mirror commonly and keep away from making use of an excessive amount of stress to it.
Utilizing Acceptable Instruments
When eradicating the rear view mirror mount, it’s essential to have the best instruments for the job. The next are important instruments you will have:
- Phillips screwdriver
- Flat-head screwdriver
- Crowbar (non-obligatory)
- Pry bar (non-obligatory)
- Trim elimination device (non-obligatory)
Step 7: Eradicating the Mount
After you have situated the mounting bolts, use the suitable screwdriver to rigorously take away them. Grip the mount firmly and gently pull it down and off the windshield. In some circumstances, it’s possible you’ll encounter some resistance. In that case, use the pry bar or crowbar (wrapped with a fabric to stop scratches) to rigorously pry the mount away from the windshield. Keep away from extreme drive to stop damaging the windshield or the mount itself.
In some autos, the rear view mirror mount could also be secured with further clips or bolts. If so, use the suitable instruments to take away these further fasteners earlier than trying to take away the mount.
| Software | Goal |
|---|---|
| Phillips screwdriver | Eradicating mounting bolts |
| Flat-head screwdriver | Prying or eradicating clips |
| Crowbar (non-obligatory) | Gently prying the mount off the windshield |
| Pry bar (non-obligatory) | Gently prying the mount off the windshield |
| Trim elimination device (non-obligatory) | Eradicating clips or trim panels across the mount |
Reinstalling the Rear View Mirror
As soon as the mount has been eliminated, you may reinstall the rear view mirror by following these steps:
- Clear the mounting floor on the windshield with a glass cleaner and a lint-free fabric. This may be certain that the adhesive bond between the mirror and the windshield is robust.
- Apply a skinny bead of mirror adhesive to the again of the mirror mount. Don’t use an excessive amount of adhesive, as this could make it tough to place the mirror appropriately and may trigger the mirror to fall off.
- Fastidiously align the mirror mount with the mounting floor on the windshield and press it into place. Maintain the mirror in place for a number of seconds to permit the adhesive to set.
- As soon as the adhesive has set, regulate the mirror to the specified place.
- Enable the adhesive to dry utterly earlier than driving the automobile. This may be certain that the mirror is securely hooked up to the windshield.
- When you have any problem reinstalling the rear view mirror, seek the advice of a certified mechanic.
Further Ideas:
- Use a high-quality mirror adhesive that’s particularly designed for automotive use.
- Ensure the windshield and the again of the mirror mount are clear and freed from any dust or particles.
- Don’t apply an excessive amount of stress when urgent the mirror mount into place, as this could injury the windshield.
- Enable the adhesive to dry utterly earlier than driving the automobile, as this may be certain that the mirror is securely hooked up to the windshield.
Here’s a desk summarizing the steps for reinstalling the rear view mirror:
Step Motion 1 Clear the mounting floor on the windshield. 2 Apply a skinny bead of mirror adhesive to the again of the mirror mount. 3 Align the mirror mount with the mounting floor on the windshield and press it into place. 4 Regulate the mirror to the specified place. 5 Enable the adhesive to dry utterly earlier than driving the automobile. Tightening the Retaining Nuts
As soon as the mirror is in place and the retaining nuts are finger-tight, you need to use a wrench to tighten them additional. Nevertheless, watch out to not overtighten the nuts, as this might injury the mirror or the windshield.
To tighten the nuts, insert the wrench into the slot on the again of the nut and switch it clockwise. Tighten the nuts till they’re comfortable, however don’t overtighten them.
Step Description 1 With the mirror in place place the retaining nuts over the mirror mount stud(s) 2 Finger tighten retaining nuts onto studs by turning them clockwise 3 Insert rearview mirror mounting device or appropriate wrench into the slot on the again of the nut 4 Gently however firmly, flip the wrench clockwise to tighten each retaining nuts equally 5 Proceed to tighten the nuts till they’re comfortable – don’t overtighten As soon as the nuts are tightened, you may verify the mirror to be sure that it’s securely hooked up. If the mirror is free, you may tighten the nuts additional. Nevertheless, if the mirror is simply too tight, it’s possible you’ll must loosen the nuts barely.
Security Precautions
Earlier than starting any repairs, you will need to take the next security precautions:
- Disconnect the battery to stop unintentional electrical shocks.
- Put on gloves to guard your arms from sharp edges.
- Use correct instruments for the job, akin to a screwdriver or wrench.
Eradicating the Rear View Mirror Mount
To take away the rear view mirror mount, comply with these steps:
- Find the screws that maintain the mount in place. These screws are often situated on the underside or the edges of the mount.
- Use a screwdriver to take away the screws.
- Grip the mount and pull it straight all the way down to take away it from the windshield.
Troubleshooting Widespread Points
Unable to Find the Mounting Screws
Should you can’t discover the mounting screws, seek the advice of your automobile’s proprietor’s guide or search on-line for directions particular to your make and mannequin.
Screw Heads are Stripped
If the screw heads are stripped, use a pair of needle-nose pliers to grip the screw and switch it out. You can even strive utilizing a rubber band between the screwdriver and the screw head for higher grip.
Mount is Caught to the Windshield
If the mount is caught to the windshield, use a plastic pry device or a bank card to softly pry it free. Watch out to not injury the windshield.
New Mount Does Not Match
If the brand new mount doesn’t match, guarantee that you’ve got bought the proper mount in your automobile. You may additionally want to regulate the place of the mount on the windshield.
Mount is Free
If the mount is free, tighten the mounting screws. You may additionally want to use a small quantity of adhesive to the again of the mount for added safety.
Mirror Vibrates
If the mirror vibrates, tighten the mounting screws. You may additionally want to regulate the place of the mirror to scale back vibration.
Mirror Does Not Keep in Place
If the mirror doesn’t keep in place, tighten the mounting screws. You may additionally want to wash the windshield and the again of the mirror to take away any dust or particles which may be interfering with the adhesive.
Mirror is Too Excessive or Too Low
If the mirror is simply too excessive or too low, regulate the place of the mount on the windshield. You may additionally want to regulate the mirror itself.
Mirror is Off-Middle
If the mirror is off-center, loosen the mounting screws and regulate the place of the mount till the mirror is centered. Then, tighten the mounting screws.
Mirror is Shaking
If the mirror is shaking, tighten the mounting screws. You may additionally want to interchange the mirror whether it is free or broken.
Tips on how to Take away the Rear View Mirror Mount
The rear view mirror mount is a small however vital a part of your automotive. It holds the rear view mirror in place and means that you can regulate it to your required place. Over time, the mount can turn into free or broken, which might make it tough to see out of the rear view mirror. If you could take away the rear view mirror mount, listed below are the steps to comply with:
- Park the automotive in a secure location and switch off the engine.
- Find the 2 screws that maintain the mount in place. They’re often situated on the underside of the mount.
- Use a screwdriver to take away the screws.
- As soon as the screws are eliminated, rigorously raise the mount off of the windshield.
- If the mount is caught, it’s possible you’ll want to make use of a pry device to softly pry it off.
- As soon as the mount is eliminated, you may exchange it with a brand new one.
Individuals Additionally Ask
How do I take away the rear view mirror mount with out breaking the windshield?
Use a pry device to softly pry the mount off of the windshield. Watch out to not apply an excessive amount of stress, as this might crack the windshield.
Can I take away the rear view mirror mount myself?
Sure, you may take away the rear view mirror mount your self. Nevertheless, in case you are not comfy working in your automotive, it’s best to take it to a mechanic.
What instruments do I must take away the rear view mirror mount?
You will have a screwdriver and a pry device to take away the rear view mirror mount.
