Changing a fan in your Asus GL-753V gaming laptop computer is usually a daunting job, however with the proper directions, it may be executed comparatively simply. You do not must be knowledgeable restore technician, and you do not want any particular instruments, only a set of screwdrivers and some minutes of your time.
To start, you will have to take away the again panel of your laptop computer. To do that, merely unscrew the screws which can be holding it in place and carry it off. As soon as the again panel is eliminated, you can see the fan. It is often positioned close to the middle of the laptop computer, and it is often held in place by 4 screws. Unscrew these screws and punctiliously carry the fan out of its housing.
Now, you will want to put in the brand new fan. Merely place the brand new fan within the housing and tighten the screws that maintain it in place. Watch out to not overtighten the screws, or you possibly can injury the fan. As soon as the brand new fan is put in, you may put the again panel again in your laptop computer and screw it into place. Now, your laptop computer must be working cooler and quieter.
Figuring out Fan Failure
The Asus GL-753V is a robust gaming laptop computer that requires satisfactory cooling to keep up optimum efficiency. In case your laptop computer is experiencing overheating points, it is important to find out if the fan is functioning appropriately. This is an in depth information that can assist you determine fan failure:
1. Bodily Examination
Visible Inspection: Examine the fan blades for any bodily injury, similar to cracks, unfastened blades, or particles accumulation. A broken fan might produce rattling or grinding noises.
Guide Rotation: Gently rotate the fan blades along with your finger to examine for smoothness. The blades ought to spin freely with none obstructions. If the fan feels stiff or resists motion, it could point out a bearing problem.
Listening Check: Energy on the laptop computer and hear attentively to the fan space. A wholesome fan ought to produce a constant airflow sound at a reasonable quantity. In the event you hear uncommon noises, similar to loud grinding or rattling, it is a signal of potential fan failure.
| Statement | Potential Fan Failure Signs |
|---|---|
| Visible Inspection | Cracks, unfastened blades, particles accumulation |
| Guide Rotation | Stiffness, resistance to motion |
| Listening Check | Loud grinding, rattling, extreme fan noise |
Making ready for the Substitute
Earlier than trying the substitute, collect the mandatory instruments and supplies:
* A small Phillips-head screwdriver
* A set of substitute followers (particularly designed for the Asus GL-753V mannequin)
* A non-abrasive cleansing fabric
* A cooling pad or elevated floor for the laptop computer
* A pair of ESD-safe gloves (elective however really helpful)
Step-by-Step Elimination
1. Make sure that the laptop computer is powered off and disconnected from all exterior gadgets.
2. Flip the laptop computer the wrong way up and take away the underside cowl utilizing the Phillips-head screwdriver. Find the followers, that are usually located on the backside of the laptop computer chassis.
3. Rigorously disconnect the fan energy connectors from the motherboard. Observe the orientation of the connectors for correct reassembly.
4. Take away the screws that safe the followers to the chassis.
5. Gently carry the followers out of their housing.
6. Use a non-abrasive cleansing fabric to take away any mud or particles from the fan housing and the encompassing space. This may assist forestall any buildup that would have an effect on the brand new followers’ efficiency.
Disassembling the Laptop computer
To entry the fan in your Asus GL-753v, you will have to disassemble the laptop computer. Listed below are the steps to do that:
- Energy off the laptop computer and unplug it from any energy sources.
- Take away the battery by sliding the battery launch latch and lifting the battery out of the laptop computer.
- Take away the screws from the underside of the laptop computer. There will probably be a number of screws, so watch out to not miss any.
- As soon as all of the screws are eliminated, you may fastidiously pry the underside cowl off the laptop computer. Watch out to not injury the quilt or any of the elements contained in the laptop computer.
Disconnecting the Fan
Upon getting the underside cowl off, you will have to disconnect the fan. Listed below are the steps to do that:
- Find the fan. It is going to be a small, sq. element with a wire hooked up to it.
- Disconnect the wire from the fan by gently pulling on the connector. Watch out to not injury the connector or the wire.
- As soon as the wire is disconnected, you may take away the fan by unscrewing the screws that maintain it in place.
| Steps | Description |
|---|---|
| 1 | Energy off the laptop computer and unplug it from any energy sources. |
| 2 | Take away the battery by sliding the battery launch latch and lifting the battery out of the laptop computer. |
| 3 | Take away the screws from the underside of the laptop computer. There will probably be a number of screws, so watch out to not miss any. |
| 4 | As soon as all of the screws are eliminated, you may fastidiously pry the underside cowl off the laptop computer. Watch out to not injury the quilt or any of the elements contained in the laptop computer. |
| 5 | Find the fan. It is going to be a small, sq. element with a wire hooked up to it. |
| 6 | Disconnect the wire from the fan by gently pulling on the connector. Watch out to not injury the connector or the wire. |
| 7 | As soon as the wire is disconnected, you may take away the fan by unscrewing the screws that maintain it in place. |
Finding the Defective Fan
To determine the defective fan, comply with these steps:
-
Take heed to fan noises: When a fan begins to fail, it usually makes uncommon noises, similar to rattling, buzzing, or clicking.
-
Verify fan vibration: Place your hand on the again of the laptop computer close to the fan vents. If the laptop computer vibrates excessively, it might point out a defective fan.
-
Use diagnostic software program: Run a laptop computer diagnostic program that may detect fan speeds and temperatures. If a fan just isn’t spinning appropriately or is overheating, the software program will determine it.
-
Detailed Fan Inspection:
-
Disconnect the laptop computer from the ability outlet.
-
Take away the underside panel of the laptop computer. This often includes unscrewing just a few screws.
-
Find the cooling system. It usually consists of warmth pipes, a warmth sink, and a number of followers.
-
Establish the defective fan. Look at the followers for any seen injury, similar to damaged blades, unfastened wires, or extreme mud accumulation.
-
Verify fan rotation. Gently attempt to rotate the fan blades. If a fan is caught or rotates with problem, it’s possible defective.
-
Measure fan voltage and present. When you’ve got a multimeter, you may measure the voltage and present provided to the fan. If the readings are considerably completely different from the specs, it signifies {an electrical} problem with the fan.
-
Examine cooling vents. Make sure the cooling vents on the laptop computer’s exterior are away from any blockages, similar to mud or particles.
-
Detaching the Previous Fan
With the intention to detach the outdated fan, you will want to take away all of the screws securing it to the laptop computer casing. As soon as the screws have been eliminated, you may fastidiously carry the fan out of the casing. Watch out to not injury any of the wires or elements hooked up to the fan.
Step 1: Find the Fan
The fan is often positioned within the backside of the laptop computer casing. It is going to be lined by a plastic shroud that you will want to take away earlier than you may entry the fan.
Step 2: Take away the Screws
The fan is often secured to the casing by 4 screws. Find these screws and take away them utilizing a screwdriver.
Step 3: Carry the Fan Out
As soon as the screws have been eliminated, you may fastidiously carry the fan out of the casing. Watch out to not injury any of the wires or elements hooked up to the fan.
Step 4: Disconnect the Wires
The fan is often related to the motherboard by two wires. Disconnect these wires from the motherboard.
Step 5: Take away the Fan
As soon as the wires have been disconnected, you may utterly take away the fan from the laptop computer.
| Screw Location | Variety of Screws |
|---|---|
| Entrance of Fan | 2 |
| Again of Fan | 2 |
Putting in the New Fan
With the outdated fan eliminated, it is time to set up the brand new one. Rigorously align the brand new fan with the mounting holes on the heatsink. The fan ought to match snugly into place. As soon as the fan is aligned, safe it with the screws that had been eliminated earlier. Be sure you tighten the screws securely, however don’t overtighten them.
Changing the Thermal Paste
Earlier than putting in the brand new fan, it’s a good suggestion to exchange the thermal paste that was utilized to the heatsink. Thermal paste helps to conduct warmth away from the CPU and into the heatsink. Over time, thermal paste can dry out and change into much less efficient. Changing the thermal paste will assist to make sure that the brand new fan is ready to cool the CPU successfully.
To interchange the thermal paste, merely apply a small quantity of recent thermal paste to the middle of the heatsink. Use a cotton swab or your finger to unfold the thermal paste evenly over the floor of the heatsink. As soon as the thermal paste is utilized, fastidiously place the brand new fan on high of the heatsink.
Reconnecting the Wires
The following step is to reconnect the wires to the brand new fan. The fan can have two wires, a crimson wire and a black wire. The crimson wire must be related to the constructive terminal on the motherboard, and the black wire must be related to the damaging terminal. As soon as the wires are related, the fan ought to begin spinning.
Testing the Fan
As soon as the brand new fan is put in and the wires are related, you will need to take a look at the fan to guarantee that it’s working correctly. To check the fan, merely boot up the pc and enter the BIOS. Within the BIOS, it’s best to have the ability to see the fan pace. The fan pace must be round 2000 RPM. If the fan pace just isn’t round 2000 RPM, then the fan is probably not working correctly and it’s best to troubleshoot the issue.
Reassembling the Laptop computer
As soon as the brand new fan is put in, it is time to reassemble the laptop computer. Comply with these steps in reverse order of the disassembly course of:
7. Substitute the Motherboard
Rigorously align the motherboard with the bottom of the laptop computer and gently decrease it into place. Make sure that all of the connectors and ports are correctly aligned.
Safe the motherboard utilizing the screws and gently tighten them till comfortable. Watch out to not overtighten the screws, as this might injury the motherboard.
Substitute the battery connector on the motherboard by gently pushing down on each side of the connector till it snaps into place.
Reattach the keyboard connector by aligning it with the port on the motherboard and gently urgent down till it clicks into place.
Reconnect the touchpad connector in the identical method because the keyboard connector.
Substitute the Wi-Fi card connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reconnect the webcam connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Substitute the audio jack connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reconnect the ability button connector by aligning it with the port on the motherboard and gently urgent down till it clicks into place.
Substitute the USB port connectors by aligning them with the ports on the motherboard and gently pushing them down till they click on into place.
Reattach the HDMI port connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reconnect the Ethernet port connector by aligning it with the port on the motherboard and gently urgent it down till it clicks into place.
Substitute the VGA port connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reattach the SATA connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Substitute the M.2 SSD connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reattach the CMOS battery by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Substitute the CPU heatsink by aligning it with the CPU socket on the motherboard and gently urgent down till it clicks into place.
Safe the CPU heatsink utilizing the screws and gently tighten them till comfortable. Watch out to not overtighten the screws, as this might injury the CPU.
Verifying Profitable Substitute
Step 8: Re-Set up the Again Panel and Battery
As soon as the fan has been efficiently changed, it is important to re-install the again panel and battery to finish the restore. Comply with these detailed steps fastidiously to make sure correct set up:
- Align the again panel with the chassis of the laptop computer, guaranteeing that every one tabs and slots are in place.
- Gently press across the edges of the again panel to safe it into place. Make certain it’s firmly seated and there are not any gaps or misalignments.
- Retrieve the battery from a secure storage location.
- Slide the battery again into its designated compartment inside the laptop computer.
- Safe the battery by sliding the latch or lever into the locked place.
Guaranteeing Performance
After reassembling the laptop computer, it is essential to confirm that the brand new fan is functioning appropriately. Energy on the system and observe the next:
- Verify for Noise Discount: Hear attentively for any uncommon noises or rattling sounds coming from the fan. A correctly put in fan ought to function easily and quietly.
- Monitor System Temperatures: Use a temperature monitoring software program or utility to trace the CPU and GPU temperatures. The temperatures must be inside regular working ranges.
- Run a Stress Check: Run a stress take a look at software or benchmark to place the laptop computer beneath load. This may take a look at the fan’s capacity to successfully dissipate warmth and preserve optimum temperatures.
If all these checks are passable, you could have efficiently changed the fan in your Asus GL-753v and restored it to its optimum efficiency.
Troubleshooting Suggestions
In the event you encounter any points whereas altering out the fan in your ASUS GL-753V, listed below are some troubleshooting suggestions:
9. Examine the Fan Blades
Completely examine the fan blades for any injury, similar to cracks or bent sections. Broken blades can create an imbalance whereas spinning, inflicting extreme noise or diminished airflow. If any injury is current, substitute the fan with a brand new one.
To examine the fan blades for injury, maintain the fan in your hand and rotate it slowly. Search for any seen cracks or bends within the blades. In the event you discover any injury, substitute the fan.
You can too use a flashlight to examine the fan blades for injury. Shine the flashlight by means of the blades and search for any cracks or bends. In the event you discover any injury, substitute the fan.
If you’re not sure whether or not or not the fan blades are broken, you may take the pc to a certified technician for additional inspection.
| Harm | Impact | Answer |
|---|---|---|
| Cracked blades | Extreme noise, diminished airflow | Substitute fan |
| Bent blades | Imbalance whereas spinning, diminished airflow | Substitute fan |
Security Precautions
Earlier than you start, you will need to comply with these security precautions to make sure your security and forestall injury to your Asus GL-753V:
- Unplug your laptop computer from any energy supply and take away the battery.
- Put on anti-static gloves or a wrist strap to stop electrostatic discharge (ESD).
- Use a clear and well-lit workspace.
- Deal with the fan with care to keep away from injury.
- Don’t contact the fan blades or the copper coils.
- Don’t try to restore the fan your self in case you are not snug doing so.
- If you’re not sure about any of the steps, seek the advice of a certified technician.
- Get rid of the outdated fan correctly.
- Wash your palms completely after dealing with the fan.
- Permit the laptop computer to chill down utterly earlier than reassembling it.
10. Putting in the New Fan
As soon as the outdated fan is eliminated, it’s time to set up the brand new fan. To do that, comply with these steps:
- Align the brand new fan with the fan header on the motherboard.
- Gently press down on the fan till it clicks into place.
- Join the fan cable to the motherboard.
- Safe the fan with the screws offered.
- Reassemble the laptop computer.
As soon as the laptop computer is reassembled, plug it again into energy and switch it on. The brand new fan ought to now be functioning correctly.
How one can Change Out a Fan in My ASUS GL-753V
The ASUS GL-753V is a gaming laptop computer that’s identified for its highly effective efficiency and smooth design. Nonetheless, like all laptops, it’s vulnerable to overheating, which may result in decreased efficiency and even injury to the laptop computer. One of the frequent causes of overheating is a defective fan, which will be simply changed by following these steps:
- Energy down the laptop computer and unplug it from the ability outlet.
- Flip the laptop computer over and take away the screws that maintain the underside panel in place.
- As soon as the panel is eliminated, find the fan and disconnect the ability cable.
- Unscrew the fan from the laptop computer and take away it.
- Substitute the outdated fan with the brand new fan and screw it into place.
- Reconnect the ability cable to the fan.
- Substitute the underside panel and screw it into place.
Folks Additionally Ask
Why is my ASUS GL-753V overheating?
There are a number of the reason why your ASUS GL-753V could also be overheating. A few of the most typical causes embody:
- A defective fan
- A clogged air vent
- A excessive ambient temperature
- A demanding workload
How can I forestall my ASUS GL-753V from overheating?
There are a number of issues you are able to do to stop your ASUS GL-753V from overheating, together with:
- Maintain the air vents clear and away from any obstructions.
- Use the laptop computer in a cool, well-ventilated atmosphere.
- Keep away from inserting the laptop computer on a mushy floor, similar to a blanket or pillow, which may block the air vents.
- Cut back the workload on the laptop computer by closing any pointless applications or tabs.
- Think about using a cooling pad to assist dissipate warmth from the laptop computer.
The place can I discover a substitute fan for my ASUS GL-753V?
Yow will discover a substitute fan on your ASUS GL-753V from a number of on-line retailers, together with Amazon, Newegg, and eBay. Be sure you buy a fan that’s suitable along with your particular laptop computer mannequin.
