Think about the comfort of effortlessly sliding your Ford seat forwards and backwards to accommodate completely different drivers or cargo wants. Putting in an additional Ford seat L monitor can rework your automobile right into a haven of customizable consolation and flexibility. This complete information will empower you with step-by-step directions, guaranteeing a seamless and profitable set up. Whether or not you are a seasoned mechanic or an adventurous DIY fanatic, put together to reinforce your driving expertise with this worthwhile improve. Embark on this journey to unlock the total potential of your Ford seat’s mobility and personalization.
Earlier than delving into the set up course of, let’s collect the important instruments and supplies. You may want a set of metric wrenches, a socket set, a drill, drill bits, self-tapping screws, and naturally, the additional Ford seat L monitor. Together with your arsenal of assets prepared, you’ll be able to proceed with confidence. Step one includes eradicating the prevailing seat out of your automobile. Fastidiously disconnect the wiring harness and unbolt the seat from its mounting factors. As soon as the seat is eliminated, you will have clear entry to the realm the place the additional L monitor can be put in.
Now comes the exact set up of the additional Ford seat L monitor. Place the L monitor onto the seat base and align it precisely with the prevailing monitor. Safe the L monitor firmly utilizing the offered self-tapping screws. Make sure the screws are adequately tightened to forestall any motion or rattling throughout use. As soon as the L monitor is securely fixed, rigorously reinstall the seat into your automobile. Reconnect the wiring harness and bolt the seat again into its unique place. With these steps meticulously adopted, you have efficiently put in the additional Ford seat L monitor, increasing the vary of seat changes and elevating your driving consolation to new heights.
Finding the Current L Monitor
To start, find the prevailing L monitor in your Ford automobile. That is the monitor that the seat rails slide forwards and backwards on. It’s sometimes situated below the seat, and it might be lined by a plastic or metallic trim panel. If you’re having bother discovering the L monitor, seek the advice of your automobile’s proprietor’s guide or seek for diagrams on-line.
Upon getting situated the prevailing L monitor, you will want to find out how a lot extra monitor it’s essential to set up. This can depend upon the kind of seat you might be putting in and the quantity of adjustment you need. Usually talking, you will want so as to add at the least 12 inches of monitor to every facet of the seat.
Here’s a desk of measurements and ideas for a way a lot extra L monitor it’s possible you’ll want:
| Seat Sort | Further L Monitor Wanted |
|---|---|
| Customary bench seat | 12 inches per facet |
| Bucket seat | 18 inches per facet |
| Racing seat | 24 inches per facet |
Upon getting decided how a lot extra monitor you want, you should purchase the suitable monitor on-line or out of your native auto elements retailer.Assembling the Further L Monitor
Step 1: Collect Supplies
You will have the next supplies:
- Further L monitor
- L monitor mounting bolts
- Socket wrench
Step 2: Put together the L Monitor
Measure and mark the places for the mounting bolts on the L monitor. Drill pilot holes for the bolts utilizing a drill bit that’s barely smaller than the bolts.
Step 3: Set up the Mounting Bolts
Insert the mounting bolts into the pilot holes and tighten them utilizing the socket wrench. Be certain that the bolts are tightened securely, however don’t overtighten them.
| Tightening Torque | Bolt Measurement |
|---|---|
| 10-12 ft-lbs | 1/4-20 bolts |
| 15-18 ft-lbs | 5/16-18 bolts |
| 20-25 ft-lbs | 3/8-16 bolts |
Step 4: Connect the L Monitor to the Car
Align the L monitor with the mounting holes on the automobile. Insert the mounting bolts into the holes and tighten them utilizing the socket wrench. Be certain that the L monitor is securely connected.
Aligning and Attaching the L Monitor
As soon as the L monitor is lower to the proper size, you will need to align it correctly earlier than attaching it to the ground. Use the next steps to make sure correct alignment:
- Place the L monitor on the ground alongside the specified alignment.
- Test for alignment utilizing a measuring tape or straightedge to make sure it’s parallel to the automobile’s body.
- Mark the situation of the mounting holes utilizing a pencil or marker.
For safe attachment, use the next process:
- Drill pilot holes on the marked places utilizing a drill bit that’s barely smaller than the diameter of the mounting bolts.
- Align the L monitor with the pilot holes and insert the mounting bolts.
- Tighten the bolts utilizing a wrench or socket, guaranteeing they’re securely fixed.
| Materials | Amount | Size |
|---|---|---|
| L Monitor | 2 | As per automobile necessities |
| Mounting Bolts | 8-10 (per L monitor) | 1/2 inch |
| Drill Bit | 1 | 1/4 inch |
| Measuring Tape | 1 | N/A |
| Wrench or Socket | 1 | N/A |
Tightening the Carriage Bolts
That is the ultimate step within the set up course of. As soon as the bolts are tightened, the seat can be securely fixed to the L-track. To tighten the bolts, you will want a socket wrench or a field wrench. Begin by tightening the bolts finger-tight. As soon as the bolts are finger-tight, use the wrench to tighten them additional. Watch out to not overtighten the bolts, as this could harm the threads.
Here’s a desk summarizing the steps for tightening the carriage bolts:
| Step | Directions |
|---|---|
| 1 | Tighten the bolts finger-tight. |
| 2 | Use a wrench to tighten the bolts additional. |
| 3 | Watch out to not overtighten the bolts. |
Reinforcing the L Monitor
Reinforcing the L monitor is a necessary step to make sure the steadiness and sturdiness of your aftermarket seat set up. This is an in depth information that can assist you reinforce the L monitor:
Supplies Required
| Part | Amount |
|---|---|
| 1/4″ x 1″ Metal Flat Bar | 2 |
| 1/4″ Bolts | 8 |
| Washers | 8 |
| Nuts | 8 |
Process
- Find Reinforcement Factors: Discover the prevailing weld nuts or mounting factors on the automobile’s flooring the place the unique seat monitor was connected. These factors will function the reinforcement factors.
- Measure and Reduce Flat Bars: Reduce two items of 1/4" x 1" metal flat bar to a size that corresponds to the within width of the automobile’s flooring.
- Place Flat Bars: Place the flat bars alongside the within fringe of the ground, parallel to the prevailing L monitor. Be certain that they align with the reinforcement factors.
- Safe Flat Bars: Utilizing 1/4" bolts, washers, and nuts, bolt the flat bars to the reinforcement factors. Tighten the bolts securely.
- Connect to L Monitor: Place the L monitor over the flat bars and safe it utilizing bolts, washers, and nuts. Tighten the bolts to the advisable torque specs.
- Further Concerns: In sure circumstances, comparable to for heavy-duty functions or for putting in aftermarket seats with a big weight capability, it’s possible you’ll want so as to add extra assist by welding the flat bars to the automobile’s flooring. Seek the advice of with a certified automotive skilled for correct welding directions.
Putting in the Seat on the L Monitor
As soon as the L monitor is put in, you’ll be able to start putting in the seat. To do that, you will want to:
- Align the seat with the L monitor. Make it possible for the seat is dealing with the proper route and that the entrance of the seat is aligned with the entrance of the L monitor.
- Raise the seat onto the L monitor. Fastidiously carry the seat onto the L monitor and be sure that it’s securely seated.
- Slide the seat ahead and backward. Slide the seat ahead and backward to be sure that it strikes easily alongside the L monitor.
- Tighten the seat bolts. Tighten the seat bolts to safe the seat to the L monitor.
- Reinstall the seat covers. Reinstall the seat covers to cowl the seat bolts and provides the seat a completed look.
6. Regulate the Seat Place
As soon as the seat is put in, you’ll be able to regulate the seat place to your liking. To do that, you need to use the seat adjustment levers to maneuver the seat ahead and backward, up and down, and tilt the seatback.
7. Set up the Seat {Hardware}
The ultimate step is to put in the seat {hardware}. This consists of putting in the seat belt buckles, the seat belt retractors, and the seat belt anchors. The seat {hardware} is usually included with the seat, however it’s possible you’ll have to buy it individually if you’re putting in an aftermarket seat.
Putting in the Seat Belt Buckles
To put in the seat belt buckles, you will want to:
Putting in the Seat Belt Retractors
To put in the seat belt retractors, you will want to:
Adjusting the Seat Place
To regulate the seat place, observe these steps:
- Find the seat adjustment levers. These are normally situated on the facet of the seat.
- Pull the lever ahead to maneuver the seat ahead.
- Push the lever again to maneuver the seat again.
- Elevate or decrease the seat cushion. To do that, pull up on the lever situated on the entrance of the seat cushion.
- Tilt the seatback ahead or backward. To do that, pull up on the lever situated on the rear of the seatback.
- Regulate the lumbar assist. To do that, flip the knob situated on the facet of the seat.
- Regulate the headrest. To do that, pull up on the lever situated on the prime of the headrest.
- Save your seat place. To do that, press the “M” button on the seat adjustment panel.
Here’s a desk that summarizes the seat adjustment options:
| Characteristic | How you can Regulate |
|---|---|
| Transfer seat ahead | Pull lever ahead |
| Transfer seat again | Push lever again |
| Elevate or decrease seat cushion | Pull up on lever at entrance of seat cushion |
| Tilt seatback ahead or backward | Pull up on lever at rear of seatback |
| Regulate lumbar assist | Flip knob on facet of seat |
| Regulate headrest | Pull up on lever at prime of headrest |
| Save seat place | Press “M” button on seat adjustment panel |
Security Precautions
Earlier than embarking on the set up course of, it’s crucial to prioritize security by adhering to the next precautions:
- Put on Protecting Gear: Don security glasses, gloves, and closed-toe sneakers to reduce the danger of harm.
- Disconnect the Battery: Disconnect the unfavourable terminal of your battery to forestall electrical hazards through the set up.
- Park on a Stage Floor: Park your automobile on a flat, secure floor to make sure it stays stationary all through the method.
- Assist the Seat: Make the most of a jack stand or different appropriate assist to forestall the seat from falling whereas disconnected.
- Use Correct Instruments: Make use of the suitable instruments for every job, together with a socket wrench, torque wrench, and drill.
- Comply with Directions Fastidiously: Confer with the producer’s directions or a good on-line information to make sure correct set up.
- Test Tightness Repeatedly: As soon as put in, periodically examine the tightness of all bolts and screws to take care of security.
- Safe L Monitor: Make sure the L monitor is securely connected to the ground or brackets utilizing the required bolts and torque settings.
- Reattach Seat: Fastidiously reattach the seat to the L monitor, guaranteeing it slides easily and locks into place securely.
9. Test Alignment and Tighten Bolts
Examine the alignment of the newly put in L monitor to make sure it’s parallel to the prevailing monitor. Use a measuring tape or ruler to confirm the distances and angles. Tighten all bolts and screws to the required torque values utilizing a torque wrench. This step ensures the L monitor stays firmly in place and the seat will be adjusted easily and safely.
Troubleshooting Widespread Points
Should you encounter any points whereas putting in the additional Ford seat L monitor, examine the next troubleshooting steps:
1. Monitor Alignment
Be certain that the brand new L monitor is correctly aligned with the prevailing one. Misalignment can stop the seats from sliding easily.
2. Bolt Tightening
Confirm that each one bolts are securely tightened. Free bolts may cause rattling and instability.
3. Particles Elimination
Examine the monitor for any particles or filth. Clear it totally to forestall interference with seat motion.
4. Seat Compatibility
Affirm that the seats you propose to make use of are suitable with the L monitor system. Incompatible seats might not match accurately.
5. Rail Extension
If it’s essential to lengthen the monitor size, use suitable rail extension brackets. Improper extension can weaken the monitor power.
6. Lubrication
Apply a skinny layer of lubricant to the monitor to cut back friction and enhance seat sliding.
7. Wiring Obstructions
Be certain that there are not any wiring harnesses or cables obstructing the monitor path. Keep away from harm throughout set up.
8. Security Precautions
At all times put on security glasses and gloves. Use correct lifting strategies to keep away from harm.
9. Instrument Necessities
Have all needed instruments obtainable, together with a socket wrench, drill, and acceptable fasteners.
10. Search Skilled Help
Should you encounter any persistent points or have any considerations, don’t hesitate to hunt skilled help from an skilled mechanic.
How To Set up Further Ford Seat L Monitor
To put in further Ford seat L monitor, you will want the next instruments and supplies:
- Socket wrench
- 10mm socket
- 13mm socket
- 15mm socket
- 18mm socket
- T40 Torx bit
- Flathead screwdriver
- Phillips head screwdriver
- New seat L monitor
- Bolts (4x M10x1.5, 4x M12x1.75, 4x M14x2.0)
- Washers (4x M10, 4x M12, 4x M14)
- Lock nuts (4x M10, 4x M12, 4x M14)
Upon getting gathered the entire needed instruments and supplies, you’ll be able to observe these steps to put in the brand new seat L monitor:
1. Take away the previous seat L monitor. To do that, you will want to take away the 4 bolts that safe the seat L monitor to the seat body. As soon as the bolts are eliminated, you’ll be able to carry the seat L monitor off of the seat body.
2. Clear the seat body. As soon as the previous seat L monitor is eliminated, you will want to wash the seat body. This can assist to make sure that the brand new seat L monitor is put in correctly.
3. Set up the brand new seat L monitor. To do that, you will want to position the brand new seat L monitor on the seat body. Make it possible for the brand new seat L monitor is aligned correctly.
4. Safe the brand new seat L monitor. As soon as the brand new seat L monitor is aligned correctly, you will want to safe it to the seat body. To do that, you will want to insert the 4 bolts into the holes within the seat L monitor and tighten them till they’re cosy.
5. Check the brand new seat L monitor. As soon as the brand new seat L monitor is put in, you will want to check it to be sure that it’s working correctly. To do that, you will want to sit down within the seat and transfer the seat forwards and backwards. The seat ought to transfer easily and simply.
Folks Additionally Ask
What’s a seat L monitor?
A seat L monitor is a metallic monitor that’s mounted to the seat body. The seat L monitor permits the seat to maneuver forwards and backwards.
How do I do know if I want to switch my seat L monitor?
In case your seat shouldn’t be shifting easily or simply, it might be needed to switch the seat L monitor.
How a lot does it value to switch a seat L monitor?
The price to switch a seat L monitor will fluctuate relying on the make and mannequin of your automobile. Nonetheless, you’ll be able to count on to pay between $100 and $300 for the elements and labor.
